I need help creating a thesis and an outline on Organic Solar Cells. Prepare this assignment according to the guidelines found in the APA Style Guide. An abstract is required.

I need help creating a thesis and an outline on Organic Solar Cells. Prepare this assignment according to the guidelines found in the APA Style Guide. An abstract is required. In 1960, the efficiency of the photovoltaic cells was further increased to 14%. Hoffman Electronics remained determined to increase the efficiency of the photovoltaic cells.In 1960, the photovoltaic solar cells were industrially manufactured in Wisconsin by Silicon Sensors, Inc., of Dodgeville, Wisconsin. In 1963, Sharp Corporation began producing silicon photovoltaic modules.In the 1970s, Exxon Corporation designed solar cells with 80% less cost. Dr Elliot Berman helped the Exxon Corporation to achieve the cost-effective method and materials. The purpose of reducing the fee is to promote the utilization of technology for domestic as well as arid locations (Markvart and Bogus, 1994, p36).In 1972, educational television was power by cadmium sulphide (CDs) photovoltaic system in Niger.In 1976, first amorphous silicon photovoltaic cells were fabricated by RCA Laboratories in coordination with David Carlson and Christopher Wronskian.In1980, 10% efficiency is attained by thin film based solar cells utilizing copper sulphide/cadmium sulphide at the University of Delaware.In 1992, the researchers in the University of South Florida developed a thin-film solar cell utilizing cadmium telluride that attained an efficiency of 15.9% (R and All, 2006, pp. 53–78).In 1998, Subtend Guha developed a flexible solar cell that is roofing material. After the development of such type of solar cells, a new era of flexible solar cells is invented (Green, 2009, pp. 183–189).&nbsp.&nbsp.In 1999, National Renewable Energy Laboratory in coordination with Spectro lab, Inc developed a solar cell that has 32.3% efficiency. The cells attained such efficiency due to utilizing different absorption layers. However, it does require a focused and concentrated solar light and a cooling mechanism. Generally, it requires, 50 times more focused solar light as compared to standard solar cells. In the same period, the National Renewable Energy Laboratory developed a thin-film solar cell that attained an efficiency of about 18.8%.